filter by price
filter by color
filter by size
filter by weight
filter by rating
Savage
Genuine HPI quality spare part for easy maintenance and repairs. Fits the Savage series of monster trucks.
NOTE: This chassis will fit the Savage X, however the transmission case will fit higher in the chassis because it was designed for the original Savage truck.
$60.00
Cannot use for #A911/ A912 or 72516. Spare Part for ONLY #86038
$12.00
2 Speed First Gear for Savage
Genuine HPI spare part for ensured quality, correct maintenance and easy repairs. See below for kit compatibility.
$12.00
Savage 25 High Speed Gear/Good for 25+ size engine
Available now from HPI racing is a 47 Tooth Spur Gear for all Savage monster trucks. This addition expands the range of gearing for the Savage, giving racers and bashers more choices to help get the most performance possible out of their trucks. The smaller diameter of the 47 Tooth gear delivers higher top speed, and also makes room for the installation of a larger clutch bell without modifying the truck.
$14.00
Savage 25 High Speed Gear/Good for 25+ size engine
Available now from HPI racing is a 47 Tooth Spur Gear for all Savage monster trucks. This addition expands the range of gearing for the Savage, giving racers and bashers more choices to help get the most performance possible out of their trucks. The smaller diameter of the 47 Tooth gear delivers higher top speed, and also makes room for the installation of a larger clutch bell without modifying the truck.
$18.00
NITRO 3 2 SPEED/Spare Part for #86038
Discontinued, replacement part: #106630
Available from HPI Racing are a selection of Aluminium Threaded Pinion Gears for the Nitro 3! This wide range of gears allows Nitro 3 racers with the #86038 Two Speed Transmission to fine tune the gearing for any size track.
$22.00
For #86038 2 SPEED TRANSMISSION (NITRO 3)
Discontinued, replacement part: #106631
Available from HPI Racing are a selection of Aluminium Threaded Pinion Gears for the Nitro 3! This wide range of gears allows Nitro 3 racers with the #86038 Two Speed Transmission to fine tune the gearing for any size track.
$22.00
Savage/Durable, lightweight/Requires B021, 86045 for Rush
The HPI Racing Clutch Bells for the Savage monster trucks are made from high strength machined steel and hardened for maximum durability to provide lasting performance in any driving conditions.
These Clutch Bells can be used with the stock Savage Spur Gears, and they are a mandatory upgrade when using HPI Steel Spur Gears. Machined holes help keep the weight down for quick acceleration, and the holes also help cool the clutch shoes for consistent performance. Each gear is stamped with the number of teeth for easy identification.
The Racing Clutch Bell is available in different teeth numbers, giving racers and bashers the choice to adjust the gear ratio to the terrain for optimum performance.
The more teeth on the clutch bell (or fewer the teeth on the spur gear) the more top speed with slightly reduced acceleration, ideal for smooth surfaces or longer straights. The fewer number of teeth on the clutch bell (or the higher number of teeth on the spur gear) better the acceleration and torque with slightly less top speed, ideal for rough terrain, steep hills or short tracks with tight corners.
Available sizes: #77103 - Racing Clutch Bell 13 tooth #77104 - Racing Clutch Bell 14 tooth #77105 - Racing Clutch Bell 15 tooth #77106 - Racing Clutch Bell 16 tooth #77107 - Racing Clutch Bell 17 tooth #77108 - Racing Clutch Bell 18 tooth #77109 - Racing Clutch Bell 19 tooth #77110 - Racing Clutch Bell 20 tooth
The perfect match for the HPI Racing clutch bells and also available from stock, are the HPI Steel Spur Gear Sets for the Savage. Both together will make the drive train last almost forever.
#77127 - HEAVY DUTY SPUR GEAR 47 TOOTH #77132 - HEAVY DUTY SPUR GEAR 52 TOOTH
These steel Heavy Duty Spur Gears are an excellent upgrade for Savage owners who use their trucks in extreme conditions with high output engines. It's machined from high carbon steel for precise roundness and smooth tooth shape ensures consistent gear mesh, high efficiency and long gear life.
The HPI machined Racing Clutch Bells can also be used on the MT-2 and Rush Evo in combination with the following additional option parts: #B021 Ball Bearing 5x10x4mm (2pcs) #86045 Engine Mount 20mm (purple)
$22.00
Savage/Durable, lightweight/Requires B021, 86045 for Rush
The HPI Racing Clutch Bells for the Savage monster trucks are made from high strength machined steel and hardened for maximum durability to provide lasting performance in any driving conditions.
These Clutch Bells can be used with the stock Savage Spur Gears, and they are a mandatory upgrade when using HPI Steel Spur Gears. Machined holes help keep the weight down for quick acceleration, and the holes also help cool the clutch shoes for consistent performance. Each gear is stamped with the number of teeth for easy identification.
The Racing Clutch Bell is available in different teeth numbers, giving racers and bashers the choice to adjust the gear ratio to the terrain for optimum performance.
The more teeth on the clutch bell (or fewer the teeth on the spur gear) the more top speed with slightly reduced acceleration, ideal for smooth surfaces or longer straights. The fewer number of teeth on the clutch bell (or the higher number of teeth on the spur gear) better the acceleration and torque with slightly less top speed, ideal for rough terrain, steep hills or short tracks with tight corners.
Available sizes: #77103 - Racing Clutch Bell 13 tooth #77104 - Racing Clutch Bell 14 tooth #77105 - Racing Clutch Bell 15 tooth #77106 - Racing Clutch Bell 16 tooth #77107 - Racing Clutch Bell 17 tooth #77108 - Racing Clutch Bell 18 tooth #77109 - Racing Clutch Bell 19 tooth #77110 - Racing Clutch Bell 20 tooth
The perfect match for the HPI Racing clutch bells and also available from stock, are the HPI Steel Spur Gear Sets for the Savage. Both together will make the drive train last almost forever.
#77127 - HEAVY DUTY SPUR GEAR 47 TOOTH #77132 - HEAVY DUTY SPUR GEAR 52 TOOTH
These steel Heavy Duty Spur Gears are an excellent upgrade for Savage owners who use their trucks in extreme conditions with high output engines. It's machined from high carbon steel for precise roundness and smooth tooth shape ensures consistent gear mesh, high efficiency and long gear life.
The HPI machined Racing Clutch Bells can also be used on the MT-2 and Rush Evo in combination with the following additional option parts: #B021 Ball Bearing 5x10x4mm (2pcs) #86045 Engine Mount 20mm (purple)
$22.00
Savage/Durable, lightweight, extra cooling
The HPI Racing Clutch Bells for the Savage monster trucks are made from high strength machined steel and hardened for maximum durability to provide lasting performance in any driving conditions.
These Clutch Bells can be used with the stock Savage Spur Gears, and they are a mandatory upgrade when using HPI Steel Spur Gears. Machined holes help keep the weight down for quick acceleration, and the holes also help cool the clutch shoes for consistent performance. Each gear is stamped with the number of teeth for easy identification.
The Racing Clutch Bell is available in different teeth numbers, giving racers and bashers the choice to adjust the gear ratio to the terrain for optimum performance.
The more teeth on the clutch bell (or fewer the teeth on the spur gear) the more top speed with slightly reduced acceleration, ideal for smooth surfaces or longer straights. The fewer number of teeth on the clutch bell (or the higher number of teeth on the spur gear) better the acceleration and torque with slightly less top speed, ideal for rough terrain, steep hills or short tracks with tight corners.
Available sizes: #77103 - Racing Clutch Bell 13 tooth #77104 - Racing Clutch Bell 14 tooth #77105 - Racing Clutch Bell 15 tooth #77106 - Racing Clutch Bell 16 tooth #77107 - Racing Clutch Bell 17 tooth #77108 - Racing Clutch Bell 18 tooth #77109 - Racing Clutch Bell 19 tooth #77110 - Racing Clutch Bell 20 tooth
The perfect match for the HPI Racing clutch bells and also available from stock, are the HPI Steel Spur Gear Sets for the Savage. Both together will make the drive train last almost forever.
#77127 - HEAVY DUTY SPUR GEAR 47 TOOTH #77132 - HEAVY DUTY SPUR GEAR 52 TOOTH
These steel Heavy Duty Spur Gears are an excellent upgrade for Savage owners who use their trucks in extreme conditions with high output engines. It's machined from high carbon steel for precise roundness and smooth tooth shape ensures consistent gear mesh, high efficiency and long gear life.
The HPI machined Racing Clutch Bells can also be used on the MT-2 and Rush Evo in combination with the following additional option parts: #B021 Ball Bearing 5x10x4mm (2pcs) #86045 Engine Mount 20mm (purple)
$22.00
Sprint 2
Genuine HPI spare part for ensured quality, correct maintenance and easy repairs. See below for kit compatibility.
$14.00
Sprint 2
Genuine HPI spare part for ensured quality, correct maintenance and easy repairs. See below for kit compatibility.
$20.00
Wheely King
Genuine HPI quality spare part for easy maintenance and repairs.
$12.00
FIRESTORM / E-FIRESTORM
Genuine HPI quality spare part for easy maintenance and repairs.
$8.00
Savage
Discontinued, replacement part: #105551
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.
$20.00
NITRO 3
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.
$6.00
Discontinued, replacement part: #86079
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.
$15.00
Savage
Genuine HPI spare part for ensured quality, correct maintenance and easy repairs. See below for kit compatibility.
$9.00
